Gardian Angel
School Bus Safety Lighting System
Students should be seen, not hit
Pricing Disclaimer:
All pricing is set by our authorized distributor.
Prices listed on this website are preliminary estimates and subject to change based on location, dealer, and other factors.
Please contact your local authorized dealer for exact pricing and availability.
 |
|---|
 |
 |
![[removal.ai]_tmp-62b9c586aaf84](https://static.wixstatic.com/media/d5465a_671aca24c69545e4b070f61d369913dc~mv2.png/v1/fill/w_250,h_250,al_c,q_95,enc_auto/d5465a_671aca24c69545e4b070f61d369913dc~mv2.png) |
GA3
Single White Flood + Dual Red Strobes
Integrated Pedestrian Illumination & Warning Visibility
Two Safety Functions. One Integrated School Bus Lighting System.
The Gardian Angel® GA3 combines pedestrian pathway illumination with enhanced warning visibility in one integrated school bus safety lighting system.
A high-output 1,000-lumen white LED floodlight illuminates the pedestrian pathway at the front left side of the school bus, while two high-intensity red LED warning strobes mounted on the hood provide an additional visual warning for approaching motorists.
The GA3 activates automatically with the bus’s red warning-light system, providing both pedestrian illumination and enhanced motorist awareness during the student loading and unloading sequence.
Designed as an affordable retrofit solution, the GA3 can be added to existing school bus fleets.
Illuminate the Path. Increase Warning Visibility.
A school bus stop involves two critical visibility needs:
Students need to see where they are walking.
Approaching motorists need to recognize that an active school bus stop is ahead.
The GA3 addresses both.
The white LED floodlight creates an illuminated pedestrian pathway on the front left side of the bus, while the dual red strobes provide an additional high-intensity warning signal for approaching motorists.
GA3 at a Glance
Pedestrian Illumination
One 1,000-lumen white LED floodlight illuminates the student pathway.
Dual Red Warning Strobes
Two high-intensity flashing red LED strobes provide additional motorist awareness.
18–20 Feet of Illumination
The white floodlight creates a 6–8-foot-wide illuminated pathway extending approximately 18–20 feet from the bus.
Automatic Operation
The system activates with the bus’s red warning lights.
12/24VDC White Floodlight
Dual-voltage design for school bus electrical systems.
30,000+ Hour LED Life
Long-life LED technology designed for reliable, low-maintenance operation.
How the GA3 Works
01 — The Bus Stops
The school bus stops and the driver activates the red warning-light system.
02 — The GA3 Activates
The white pedestrian floodlight and two red warning strobes automatically activate with the warning-light sequence.
03 — The Pedestrian Path Is Illuminated
The 1,000-lumen white LED floodlight projects a downward-directed ground wash onto the pedestrian pathway at the front left side of the bus.
04 — Motorists Receive an Additional Warning
The two high-intensity red LED strobes provide an additional visual warning designed to help approaching motorists recognize an active school bus stop.
05 — Students Enter or Exit
The illuminated pathway helps students see where they are walking while the warning strobes provide additional visibility to approaching traffic.
06 — Automatic Shutoff
When the bus service entrance door closes, the pedestrian floodlight automatically turns off. The warning system returns to its inactive state as the warning sequence ends.
No additional switch. No additional driver action.
Two Visibility Functions. One System.
The GA3 combines two distinct lighting functions into one school bus safety system.
Pedestrian Pathway Illumination
The downward-directed 1,000-lumen white LED floodlight illuminates the ground where students walk.
It is designed to help:
-
Illuminate the student pedestrian pathway
-
Help students see where they step
-
Improve visibility during darkness and low-light conditions
-
Make students more visible around the bus
-
Provide illumination during rain, snow, and other challenging weather
-
Create a visible pathway even during daylight conditions
Enhanced Warning Visibility
The two high-intensity red LED strobes provide an additional warning signal at the front of the school bus.
They are designed to:
-
Draw attention to an active school bus stop
-
Alert approaching motorists that students may be crossing
-
Increase warning visibility during daylight conditions
-
Provide additional visual awareness in high-traffic environments
-
Complement the existing red warning lights and stop arm
One System. Two Visibility Needs.
See the student pathway.
Recognize the active stop.
Purpose-Built Pedestrian Illumination
The GA3 uses a dedicated white LED floodlight positioned on the front left corner of the bus to illuminate the pedestrian pathway.
The light is directed toward the ground rather than directly toward students, placing illumination where students are walking.
Designed for the Loading Zone
-
1,000 lumens of white LED illumination
-
Single-side pedestrian illumination
-
Downward-directed ground wash
-
Illuminated pathway approximately 6–8 feet wide
-
Visibility extending approximately 18–20 feet from the bus
-
Designed for daytime and nighttime visibility
-
Helps illuminate the pathway during inclement weather
Enhanced Warning Visibility
The GA3 adds two high-intensity red LED strobes to the hood of the school bus.
The prominent hood-mounted position creates an additional warning point for approaching motorists while the bus is stopped and students are loading or unloading.
Built for Visibility
-
Two high-intensity red LED strobes
-
Hood-mounted configuration
-
33 flash patterns
-
Light synchronization technology
-
Designed for strong daytime visibility
-
Designed for nighttime visibility
-
SAE lens marking
-
Low-maintenance LED technology
Automatic When Students Need It
The GA3 is designed to operate with the existing school bus warning-light sequence.
When the red warning lights activate, the system automatically activates.
The white floodlight illuminates the pedestrian pathway while the red strobes provide additional warning visibility.
When the loading sequence ends, the system returns to its inactive state.
Built Around the Driver’s Workflow
The driver doesn’t need to:
-
Flip another switch
-
Remember to activate another system
-
Take an additional action during student loading
The GA3 works automatically as part of the school bus loading sequence.
Built for School Bus Fleets
The GA3 was designed specifically for school transportation and as an affordable retrofit solution for existing school bus fleets.
The system combines pedestrian illumination and warning visibility without replacing the safety equipment already installed on the bus.
Key Features
-
One 1,000-lumen white LED floodlight
-
Two high-intensity red LED warning strobes
-
12/24VDC dual-voltage white floodlight
-
IP67-rated white floodlight
-
Long-life LED technology rated for 30,000+ hours
-
33 strobe flash patterns
-
Light synchronization technology
-
Shatter-resistant white floodlight lens
-
Stainless steel white floodlight base
-
Polycarbonate construction
-
Commercial-grade design
-
Low-maintenance operation
-
Two-year manufacturer warranty
Installation & Compatibility
The GA3 is designed for installation on existing school bus fleets.
System Configuration
White Floodlight
One Gardian Angel white LED floodlight mounts at the front left corner of the bus, illuminating the pedestrian pathway.
Red Warning Strobes
Two high-intensity red LED strobes mount to the hood of the bus to provide additional warning visibility.
Installation configuration may vary depending on bus design and applicable state requirements.
Modern buses utilizing multiplex electrical systems may require additional installation procedures.
Always verify applicable state requirements before installation.
Technical Specifications
New Square Gardian Angel White LED Flood Light(s)
Quantity 1
Lumens 1,000
Voltage 12/24VDC Dual Voltage
Amp Draw 0.8A 12V / 0.5A 24V
Dimensions 4.7” W x 4.2” H x 1.6” D
Mounting 5/16” Stainless Steel Bolt
Connector 2 Jacketed Leads Blunt Cut, 11”
LEDs 15
Lens Color Clear
Base Material Stainless Steel
Housing Material Polycarbonate
Housing Color Black
Lens Material Polycarbonate
Features Shatterproof Lens
Warranty: Two-year
The GA3 may also utilize the original round Gardian Angel white LED floodlight depending on configuration and installation.
Original Gardian Angel White LED Flood Light(s)
ILLUMINATION PATTERNS: Flood: 40˚ H x 25˚ V, Spot 10˚ or Trapezoid: 40˚ H. x 15˚ V
LED COUNT: 6 LEDs
INPUT VOLTAGE: 10-16 Vdc
CURRENT DRAW: 1000 Lumen: 2 Amps @ 12.8 Vdc
COLOR TEMPERATURE: 5700k
OPERATING TEMPERATURE: -40° C to +65° C / -40° F to +149° F
DIMENSIONS: 4.5” (10 cm) W x 2.8” (6.4 cm) D Overall Height: 5.7” (14 cm) (includes bracket)
MOUNTING: Surface mount with U-bracket (included)
CERTIFICATIONS: SAE DOT Lens Marking and IP67 certified
WARRANTY: Two-year
Flashing Red/White LED Strobe Lights
OVERALL DIMENSIONS: 2.5"W x 1.375"H x 1.25"D
FLASH PATTERNS: 33
INPUT VOLTAGE: 10-16 Vdc
CURRENT CONSUMPTION: 0.5 Amps
LIGHT SYNC TECHNOLOGY: Yes
OPERATING TEMPERATURE: -40º to +65º C / -40° F to +149° F
CERTIFICATIONS: SAE Lens Marking
WARRANTY: Two-year
What’s Included
Every GA3 kit includes:
-
One Gardian Angel® 1,000-lumen white LED floodlight
-
Two high-intensity flashing red LED strobe lights
-
Wiring harness
-
All necessary mounting hardware
-
Installation instructions
-
Parts list
-
Two-year manufacturer warranty
Tested & Built for Vehicle Applications
Gardian Angel lighting systems are designed for demanding vehicle environments.
The white LED floodlight is IP67 rated and features SAE/DOT lens markings.
The red warning strobes feature SAE lens markings and are designed for operation in demanding transportation environments.
Gardian Angel lighting systems are designed to withstand the environmental conditions associated with daily school bus operation.
Works Alongside Existing School Bus Safety Equipment
The GA3 is designed to complement the safety equipment already used on school buses.
It does not replace existing equipment such as:
-
Red warning lights
-
Traditional stop arms
-
Extended stop arms
-
Illuminated signage
-
LiDAR / sensors
-
Crossing arms
-
Exterior camera systems
Instead, the GA3 adds both dedicated pedestrian illumination and enhanced warning visibility to the student loading and unloading environment.
More Visibility. Two Functions. One Integrated System.
Frequently Asked Questions
What makes the GA3 different from the other Gardian Angel systems?
The GA3 combines both pedestrian illumination and warning visibility in one system.
It includes one white LED floodlight to illuminate the pedestrian pathway and two red LED strobes to provide additional warning visibility for approaching motorists.
Where is the white floodlight mounted?
The white floodlight mounts on the front left corner of the school bus and illuminates the pedestrian pathway in front of the bus.
How many red strobes are included?
The GA3 includes two high-intensity flashing red LED strobes mounted to the hood of the bus.
How far does the white floodlight illuminate?
The GA3 creates an illuminated pathway approximately 6–8 feet wide, with visibility extending approximately 18–20 feet from the bus, depending on installation configuration.
Does the driver have to activate the GA3 manually?
No. The system is designed to activate automatically with the bus’s red warning-light sequence.
Can the white illumination help exterior cameras?
Yes. White illumination can provide exterior cameras with visible-color lighting around the bus rather than relying solely on infrared illumination, which may produce grayscale imagery.
Is the GA3 useful during daylight?
Yes. The white floodlight provides a visible ground pathway during daylight conditions, while the high-intensity red strobes provide an additional warning signal for approaching motorists.
Is the GA3 designed for bad weather?
Yes. The white floodlight is IP67 rated and the system is designed for demanding outdoor transportation environments, including rain, snow, and other challenging weather conditions.
How long are the LEDs designed to last?
The white LED technology is rated for 30,000+ hours, providing long service life and reducing maintenance requirements.
Made in the USA
Gardian Angel integrated visibility systems are proudly made in the USA.
Designed specifically for school transportation, the GA3 brings pedestrian illumination and enhanced warning visibility together in one purpose-built system.
Why Choose the GA3?
Complete the Visibility Picture
The GA3 addresses both sides of the school bus visibility challenge.
Students need to see the path.
Motorists need to see the warning.
The GA3 combines a powerful white pedestrian floodlight with two high-intensity red warning strobes to provide both functions in one integrated system.
Illuminate the Path. Increase Warning Visibility. Protect the Stop.